Inmoov robot: building of the first open source 3D printed life-size robot
Escribà Montagut, Gerard
MetadataShow full item record
The objective of this project is to contribute in the printing and assembly of a life size robot at the Vaasa University of Applied Sciences. I had the opportunity to join this project, working together with Doctor Rayko Toshev and the other Erasmus student Alexandru Galben in this long going joint project to build the first open source 3D printed life size robot. The objective was to build this robot in less than 3 months while learning to print with 3D printers and follow all the guidelines writ-ten by the creator of this project Gael Langevin.
European research projects
The following license files are associated with this item:
Showing items related by title, author, creator and subject.
Martínez Lacasa, Daniel; Pallejà Cabrè, Tomàs; Moreno Blanc, Javier; Tresánchez Ribes, Marcel; Teixidó Cairol, Mercè; Font Calafell, Davinia; Pardo, Antonio; Marco, Santiago; Palacín Roca, Jordi (Springer International Publishing Switzerland, 2014)This paper presents an autonomous agent for gas leak source detec-tion. The main objective of the robot is to estimate the localization of the gas leak source in an indoor environment without any human intervention. The ...
Chemical source localization fusing concentration information in the presence of chemical background noise Pomareda, Víctor; Magrans, Rudys; Jiménez Soto, Juan M.; Martínez Lacasa, Daniel; Tresánchez Ribes, Marcel; Burgués, Javier; Palacín Roca, Jordi; Marco, Santiago (MDPI, 2017)We present the estimation of a likelihood map for the location of the source of a chemical plume dispersed under atmospheric turbulence under uniform wind conditions. The main contribution of this work is to extend ...
Palacín Roca, Jordi; Salse, José Antonio; Valgañón, Ignasi; Clua, Xavier (Institute of Electrical and Electronics Engineers, 2004)Domestic robots are one of the new industrial challenges. In this paper, a floor-cleaning robot specifically designed for this function is proposed. Aspects such as sensor placement, motor control, robot control, and ...