Comparison of Microencapsulated Phase Change Materials Prepared at Laboratory Containing the Same Core and Different Shell Material
Data de publicació2017
Giró Paloma, Jessica
Chimenos Ribera, Josep Ma.
Fernández Renna, Ana Inés
MetadadesMostra el registre d'unitat complet
Microencapsulated Phase Change Materials (MPCM) are widely used in active and passive systems for thermal energy storage. To evaluate the strength of a proper shell/PCM system, comparisons were performed between laboratory-prepared MPCM samples produced by in situ polymerization with a phase change temperature of 50 C and a particle size of around 1–2 m with tetracosane as PCM, and polystyrene (PS) and poly (methyl methacrylate) (PMMA) as shells. Evaluation of mechanical performance was performed for different samples by means of Atomic Force Microscopy (AFM) at different temperatures (23 C and 60 C) and with different encapsulation ratios (1:3 and 1:1, shell:core) in order to compare their properties with the PCM below and above its phase change. Evaluations of the Effective Young’s modulus (E) and deformation properties were performed for both types of MPCM. For an encapsulation mass ratio of 1:3, PS has better mechanical properties because, when increasing the temperature, the E decreases less than with PMMA. In the comparison between PS/tetracosane systems with different encapsulation mass ratios (1:3 and 1:1), E values were higher for the 1:3 encapsulation mass ratio at both temperatures under study. This means that, in terms of mechanical and thermal properties, the best combination core/shell/encapsulation mass ratio is PS/tetracosane/1:3.
És part deApplied Sciences, 2017, vol. 7, núm 7, p. 723 (9 pp.)
Projectes de recerca europeus
Els fitxers de llicència següents estan associats amb aquest element:
Mostrant elements relacionats per títol, autor i matèria.
Giró Paloma, Jessica; Oncins, Gerard; Barreneche Güerisoli, Camila; Martínez, Mònica; Fernández Renna, Ana Inés; Cabeza, Luisa F. (Elsevier, 2013)Microencapsulated phase change materials (MPCM) are well known in advanced technologies for the utilization in active and passive systems, which have the capacity to absorb and slowly release the latent heat involved in ...
Giró Paloma, Jessica; Barreneche Güerisoli, Camila; Delgado, Mónica; Martínez, Mònica; Fernández Renna, Ana Inés; Cabeza, Luisa F. (Elsevier, 2014)The present work studies a Phase Change Slurry (PCS) as a proposed Thermal Energy Storage (TES) medium. Microencapsulation is an advanced technology to implement PCMs (Phase Change Material) avoiding leakage from ...
Giró Paloma, Jessica; Barreneche Güerisoli, Camila; Martínez, Mònica; Šumiga, Boštjan; Cabeza, Luisa F.; Fernández Renna, Ana Inés (Elsevier, 2015)Phase change slurries (PCS) consist on a carrier fluid binary system, where water is mostly used as continuous phase and micro-encapsulated phase change materials (MPCM) are used as dispersed phase. PCS are used in Thermal ...