Thermal and Stability Investigation of Phase Change Material Dispersions for Thermal Energy Storage by T-History and Optical Methods
Data de publicació2017
De Paola, Maria
De Simone, Marilena
MetadadesMostra el registre d'unitat complet
Glauber’s salt (sodium sulphate decahydrate) is a promising phase change material (PCM) for use in the building sector, thanks to its high enthalpy of fusion associated with a proper phase transition temperature. It also offers economic and environmental advantages because it can be obtained as a byproduct
from the disposal process of lead batteries. However, due to phenomena of phase segregation and supercooling, Glauber’s salt cannot be used in its pure state and requires the addition of rheological modifiers and nucleating agents. In this work, the initial thermal performances of mixtures based on Glauber’s salt with different compositions are compared by using the T-history method and adopting sonication for mixing, and following the same preparation procedure for all the samples. With fixed composition, the effects of the addition sequence of the reagents are also examined. The analysis carried out by optical methods based on light scattering (Turbiscan equipment) allowed us to identify the kinetics of destabilization for each sample and revealed the need to specify in detail the preparation stages of PCMs, in order to make the composition reproducible in the laboratory and on a wider scale.
És part deEnergies, 2017, vol. 10, núm. 3, p. 354 (15 pp.)
Els fitxers de llicència següents estan associats amb aquest element:
Aquest document està subjecte a una llicència Creative Commons.cc-by (c) Maria De Paola et al., 2017
Mostrant elements relacionats per títol, autor i matèria.
De Paola, Maria; Calabrò, Vincenza; De Simone, Marilena (IOP Publishing, 2017)Thermal performance and stability over time are key parameters for the characterization and application of PCMs in the building sector. Generally, inorganic PCMs are dispersions of hydrated salts and additives in water ...
Enthalpy-temperature plots to compare calorimetric measurements of phase change materials at different sample scales Rathgeber, Christoph; Schmit, Henri; Miró, Laia; Cabeza, Luisa F.; Gutiérrez, Andrea; Ushak, Svetlana; Hiebler, Stefan (Elsevier, 2018)Phase change materials (PCM) can provide high thermal energy storage capacities in narrow temperature ranges around their phase change temperature. The expectable maximum storage capacity of a PCM in a defined temperature ...
Measurement of enthalpy curves of phase change materials via DSC and T-History: When are both methods needed to estimate the behaviour of the bulk material in applications? Rathgeber, Christoph; Miró, Laia; Cabeza, Luisa F.; Hiebler, Stefan (Elsevier, 2014)Thermal energy storages (TES) based on solid–liquid phase change materials (PCM) use the latent heat of the phase transition from solid to liquid and vice versa. The enthalpy change within application relevant temperature ...