Storage Stability of Bimodal Emulsions vs. Monomodal Emulsions
Data de publicació2017
MetadadesMostra el registre d'unitat complet
Storage stability is a very important parameter that has to be considered in the formulation of asphalt emulsions. When monomodal emulsions are formulated, Stokes' law is fulfilled, therefore the higher the viscosity the less sedimentation, or the lower average droplet size the less sedimentation. But when bimodal emulsions are formulated, this rule does not apply. In this paper, two types of different emulsions are formulated: monomodal emulsions and bimodal emulsions. Bimodal emulsions are a combination of one large bitumen size and a small one. For this study, hard penetration bitumens were used, B35/50 and B15/25, because they are the most difficult bitumen to emulsify and, consequently, the worst sedimentation values are expected. Once the emulsions are manufactured, they are diluted to a bitumen rate concentration of 60% and 70%. Results show that bimodal emulsions, although having lower viscosity than their monomodal counterparts, have higher storage stability.
És part deApplied Sciences, 2017, vol. 7, núm. 12, p. 1267 (15 pp.)
Projectes de recerca europeus
Mostrant elements relacionats per títol, autor i matèria.
Querol Solà, Núria; Barreneche Güerisoli, Camila; Cabeza, Luisa F. (2017)The emulsions used in the manufacture of half warm asphat should contain very little water in their formulation. Conventional monomodal emulsions have a maximum dispersed phase concentration, ϕ, of 0.69. Recent research ...
Method for controlling mean droplet size in the manufacture of phase inversion bituminous emulsions Querol Solà, Núria; Barreneche Güerisoli, Camila; Cabeza, Luisa F. (Elsevier, 2017)The most important factors related to the manufacture of phase inversion bitumen in water emulsions are discussed in this paper. The distribution and average droplet diameter of an emulsion depends on formulation variables ...
Asphalt emulsion formulation: State of the art of formulation, properties and results of HIPR emulsions Querol Solà, Núria; Barreneche Güerisoli, Camila; Cabeza, Luisa F. (Elsevier, 2019)As a way to make pavements more economic, less polluting, and with lower energy consumption bitumen emulsions can be used. The formulation of bitumen emulsions is a complex task and they are usually produced using colloid ...