Comparative study of the thermal performance of four different shell-and-tube heat exchangers used as latent heat thermal energy storage systems
Data de publicació2017
MetadadesMostra el registre d'unitat complet
In this paper, the influence of the addition of fins and the use of two different heat transfer fluids (water and a commercial silicone) have been experimentally tested and compared in four latent heat thermal energy storage systems, based on the shell-and-tube heat exchanger concept, using paraffin
RT58 as phase change material. Three European institutions were involved under the framework of the MERITS project. A common approach (temperature and power profiles), and five different key performance indicators have been defined and used for the comparison: energy charged, average power, 5-min peak power, peak power to energy ratio, and time. For the same heat transfer fluid, results showed that finned designs (4.7-9.4 times more heat transfer surface) showed an improvement of up to 40%. On the contrary, for the same design, water (which has a specific heat 3 times higher and a thermal conductivity 4.9 times higher than silicone Syltherm 800), yielded results up to 44% higher.
És part deRenewable Energy, 2017, vol. 114, part B, p. 934-944
Els fitxers de llicència següents estan associats amb aquest element:
Aquest document està subjecte a una llicència Creative Commons.cc-by-nc-nd (c) Jaume Gasia et al., 2017
Mostrant elements relacionats per títol, autor i matèria.
Experimental evaluation of a paraffin as phase change material for thermal energy storage in laboratory equipment and in a shell-and-tube heat exchanger Gasia, Jaume; Miró, Laia; Gracia Cuesta, Alvaro de; Barreneche Güerisoli, Camila; Cabeza, Luisa F. (MDPI, 2016)The thermal behavior of a commercial paraffin with a melting temperature of 58 ºC is analyzed as a phase change material (PCM) candidate for industrial waste heat recovery and domestic hot water applications. A full and ...
Experimental investigation of the effect of dynamic melting in a cylindrical shell-and-tube heat exchanger using water as PCM Gasia, Jaume; Tay, N. H. Steven; Belusko, Martin; Cabeza, Luisa F.; Bruno, Frank (Elsevier, 2017)In the present paper, an experimental study is carried out to evaluate the effect of the dynamic melting concept in a cylindrical shell-and-tube heat exchanger using water as the phase change material (PCM) and a potassium ...
Enthalpy-temperature plots to compare calorimetric measurements of phase change materials at different sample scales Rathgeber, Christoph; Schmit, Henri; Miró, Laia; Cabeza, Luisa F.; Gutiérrez, Andrea; Ushak, Svetlana; Hiebler, Stefan (Elsevier, 2018)Phase change materials (PCM) can provide high thermal energy storage capacities in narrow temperature ranges around their phase change temperature. The expectable maximum storage capacity of a PCM in a defined temperature ...