Testing the suitability of a terrestrial 2D LiDAR scanner for canopy characterization of greenhouse tomato crops
Data de publicació2016
Gil Moya, Emilio
MetadadesMostra el registre d'unitat complet
Canopy characterization is essential for pesticide dosage adjustment according to vegetation volume and density. It is especially important for fresh exportable vegetables like greenhouse tomatoes. These plants are thin and tall and are planted in pairs, which makes their characterization with electronic
methods difficult. Therefore, the accuracy of the terrestrial 2D LiDAR sensor is evaluated for determining canopy parameters related to volume and density and established useful correlations between manual and electronic parameters for leaf area estimation. Experiments were performed in three commercial tomato greenhouses with a paired plantation system. In the electronic characterization, a LiDAR sensor scanned the plant pairs from both sides. The canopy height, canopy width, canopy volume, and leaf area were obtained. From these, other important parameters were calculated, like the tree row volume, leaf wall area, leaf area index, and leaf area density. Manual measurements were found to overestimate the parameters compared with the LiDAR sensor. The canopy volume estimated with the scanner was found to be reliable for estimating the canopy height, volume, and density. Moreover, the LiDAR scanner could assess the high variability in canopy density along rows and hence is an important tool for generating canopy maps.
És part deSensors, 2016, vol. 16, num. 9, p. 1435-1449
Els fitxers de llicència següents estan associats amb aquest element:
Mostrant elements relacionats per títol, autor i matèria.
Miranda-Fuentes, Antonio; Llorens Calveras, Jordi; Gamarra Diezma, Juan L.; Gil-Ribes, Jesús A.; Gil Moya, Emilio (MDPI, 2015)Accurate crown characterization of large isolated olive trees is vital for adjusting spray doses in three-dimensional crop agriculture. Among the many methodologies available, laser sensors have proved to be the most ...
Fruit detection, yield prediction and canopy geometric characterization using LiDAR with forced air flow Gené Mola, Jordi; Gregorio López, Eduard; Auat Cheein, Fernando A.; Guevara, Javier; Llorens Calveras, Jordi; Sanz Cortiella, Ricardo; Escolà i Agustí, Alexandre; Rosell Polo, Joan Ramon (Elsevier, 2019-11-29)Yield monitoring and geometric characterization of crops provide information about orchard variability and vigor, enabling the farmer to make faster and better decisions in tasks such as irrigation, fertilization, pruning, ...
Relationship between tree row LIDAR-volume and leaf area density for fruit orchards and vineyards obtained with a LIDAR 3D Dynamic Measurement System Sanz Cortiella, Ricardo; Rosell Polo, Joan Ramon; Llorens Calveras, Jordi; Gil Moya, Emilio; Planas de Martí, Santiago (Elsevier, 2013)In this work, a LIDAR 3D Dynamic Measurement System, based on a Two-Dimensional Terrestrial Laser-LIDAR Scanner (2D TLS), was used for the geometric characterisation of tree-row crops (apple trees, pear trees and vineyards). ...