Effect of vacuum and pressure treatments on the mechanical properties and moisture balance of wood from Pinus sylvestris
Data de publicació2016
MetadadesMostra el registre d'unitat complet
Several works have analyzed the alteration in the mechanical strength of wood after the application of protective substances. However, it remains unclear whether the significant differences obtained are caused by the protective substances, the pressure and vacuum conditions used in the treatment, or
the simultaneous effect of both. In this study, 123 wood samples from Pinus sylvestris were tested for bending, and 85 samples were tested for compression strength parallel to the grain. These samples were randomly distributed in three groups (treated with water pressure, water vacuum, and control samples simply submerged in water). The results indicated that there was no difference in mechanical properties between the treated and untreated samples. In contrast, significant differences were detected in equilibrium moisture after a prolonged drying process.
És part deBioResources, 2016, vol. 11, núm. 4, p. 9350-9358
Projectes de recerca europeus
Mostrant elements relacionats per títol, autor i matèria.
Mechanical properties of wood from Pinus sylvestris L. treated with Light Organic Solvent Preservative and with waterbone Copper Azole Villasante Plágaro, Antonio M.; Laina, Ruben; Rojas, J. A. M.; Rojas, I. M.; Vignote, Santiago (INIA, 2013)Aim of study: To determine the effect on wood from Pinus sylvestris of treatment with preservatives on mechanical properties and to establish the relation between the penetration and compression strenght. Area of study: ...
Effect of a longitudinal cut on the mechanical properties of small-diameter roundwood of Pinus nigra Arnold Villasante Plágaro, Antonio M.; Fernandez Serrano, Alvaro; Puigdomènech Franquesa, Lluís; Lampurlanés Castel, Jorge; Moliner Gil, David (North Carolina State University, 2016)The use of roundwood in structures has drawbacks that include tapering and lack of flatness, which can be overcome by making a longitudinal cut to flatten one side. The aim of this work was to compare the mechanical behavior ...
Rodríguez Puerta, Francisco; Villasante Plágaro, Antonio M. (Asociación de investigación técnica de las industrias de la madera (AITIM), 1998)Se resume el estudio realizado en el Departamento de Ingeniería Agroforestal de la Universidad de Lleida sobre las propiedades de hinchazón y merma de la especie Pinus uncinata Ram. Para ello se realizó un muestreo ...