IEA SHC Task 42 / ECES Annex 29 – A Simple Tool for the Economic Evaluation of Thermal Energy Storages

Ver/ Abrir
Fecha de publicación
2016Autor/a
Rathgeber, Christoph
Hiebler, Stefan
Lävemann, Eberhard
Dolado, Pablo
Lazaro, Ana
König-Haagen, Andreas
Brüggemann, Dieter
Campos-Celador, Álvaro
Franquet, Erwin
Fumey, Benjamin
Dannemand, Mark
Badenhop, Thomas
Diriken, Jan
Nielsen, Jan Erik
Hauer, Andreas
Cita recomendada
Rathgeber, Christoph;
Hiebler, Stefan;
Lävemann, Eberhard;
Dolado, Pablo;
Lazaro, Ana;
Gasia, Jaume;
...
Hauer, Andreas.
(2016)
.
IEA SHC Task 42 / ECES Annex 29 – A Simple Tool for the Economic Evaluation of Thermal Energy Storages.
Energy Procedia, 2016, vol. 91, p. 197-206.
https://doi.org/10.1016/j.egypro.2016.06.203.
Metadatos
Mostrar el registro completo del ítemResumen
Within the framework of IEA SHC Task 42 / ECES Annex 29, a simple tool for the economic evaluation of thermal energy storages has been developed and tested on various existing storages. On that account, the storage capacity costs (costs per installed storage capacity) of thermal energy storages have been evaluated via a Top-down and a Bottom-up approach. The Top-down approach follows the assumption that the costs of energy supplied by the storage should not exceed the costs of energy from the market. The maximum acceptable storage capacity costs depend on the interest rate assigned to the capital costs, the intended payback period of the user class (e.g. industry or building), the reference energy costs, and the annual number of storage cycles. The Bottom-up approach focuses on the realised storage capacity costs of existing storages. The economic evaluation via Top-down and Bottom-up approach is a valuable tool to make a rough estimate of the economic viability of an energy storage for a specific application. An important finding is that the annual number of storage cycles has the largest influence on the cost effectiveness. At present and with respect to the investigated storages, seasonal heat storage is only economical via large sensible hot water storages. Contrary, if the annual number of storage cycles is sufficiently high, all thermal energy storage technologies can become competitive.
Nota
Proceedings of the 4th International Conference on Solar Heating and Cooling for Buildings and Industry (SHC 2015)Es parte de
Energy Procedia, 2016, vol. 91, p. 197-206Proyectos de investigación europeos
El ítem tiene asociados los siguientes ficheros de licencia:
Excepto si se señala otra cosa, la licencia del ítem se describe comocc-by-nc-nd (c) Christoph Rathgeber et al., 2016
Publicaciones relacionadas
Showing items related by title, author, creator and subject.
-
Enthalpy-temperature plots to compare calorimetric measurements of phase change materials at different sample scales
Rathgeber, Christoph; Schmit, Henri; Miró, Laia; Cabeza, Luisa F.; Gutiérrez, Andrea; Ushak, Svetlana; Hiebler, Stefan (Elsevier, 2018)Phase change materials (PCM) can provide high thermal energy storage capacities in narrow temperature ranges around their phase change temperature. The expectable maximum storage capacity of a PCM in a defined temperature ... -
Thermal energy storage in building integrated thermal systems: A review. Part 2. Integration as passive system
Navarro Farré, Lidia; Gracia Cuesta, Alvaro de; Niall, Dervilla; Castell, Albert; Browne, Maria C.; McCormack, Sarah J.; Griffiths, Philip; Cabeza, Luisa F. (Elsevier, 2016)Energy consumption trends in residential and commercial buildings show a significant increase in recent decades. One of the key points for reducing energy consumption in buildings is to decrease the energy demand. Buildings ... -
Phase change materials and thermal energy storage for buildings
Cabeza, Luisa F.; Gracia Cuesta, Alvaro de (Elsevier, 2015)It is well known that there is a need to develop technologies to achieve thermal comfort in buildings lowering the cooling and heating demand. Research has shown that thermal energy storage (TES) is a way to do so, but ...