Exergy analysis of multi-effect water–LiBr absorption systems: From half to triple effect
Data de publicació2010
MetadadesMostra el registre d'unitat complet
An exergy analysis, which only considers the unavoidable exergy destruction, is conducted for single, double, triple and half effect Water–Lithium bromide absorption cycles. Thus, the obtained performances represent the maximum achievable performance under the given operation conditions. The coefficient of performance (COP), the exergetic efficiencies and the exergy destruction rates are determined and the effect of the heat source temperature is evaluated. As expected, the COP increases significantly from double lift to triple effect cycles. The exergetic efficiency varies less among the different configurations. In all cycles the effect of the heat source temperature on the exergy destruction rates is similar for the same type of components, while the quantitative contributions depend on cycle type and flow configuration. Largest exergy destruction occurs in the absorbers and generators, especially at higher heat source temperatures.
És part deRenewable Energy, 2010, vol. 35, núm. 8, p. 1773-1782
Projectes de recerca europeus
Mostrant elements relacionats per títol, autor i matèria.
Effect of internal heat recovery in ammonia-water absorption cooling cycles: exergy and structural analysis Boer, Dieter; Gebreslassie, Berhane Hagos; Medrano Martorell, Marc; Nogués Aymamí, Miquel (International Centre for Applied Thermodynamics, 2009)First and second law analysis have been conducted for three low temperature driven ammonia-water absorption cooling cycles with increasing internal heat recovery. Based on the results of exergy analysis the structural ...
Theoretical analysis of a novel integrated energy system formed by a microturbine and a exhaust fired single-double effect absorption chiller Medrano Martorell, Marc; Mauzey, Josh; McDonell, Vince; Samuelsen, Scott; Boer, Dieter (International Centre for Applied Thermodynamics, 2006)Integrated Energy Systems (IES) combine a distributed power generation system (DG) such as a microturbine generator (MTG) or a fuel cell with thermally activated technologies (TAT) such as absorption cooling. This integration ...
Exergy and structural analysis of an absorption cooling cycle and the effect of efficiency parameters Boer, Dieter; Medrano Martorell, Marc; Nogués Aymamí, Miquel (International Centre for Applied Thermodynamics, 2005)Absorption cycles are an alternative to compression cycles in cooling and refrigeration applications. Our analysis of an absorption cycle is based on the exergy and the structural analysis. Once the exergy analysis has ...