Measurement of enthalpy curves of phase change materials via DSC and T-History: When are both methods needed to estimate the behaviour of the bulk material in applications?
Data de publicació2014
MetadadesMostra el registre d'unitat complet
Thermal energy storages (TES) based on solid–liquid phase change materials (PCM) use the latent heat of the phase transition from solid to liquid and vice versa. The enthalpy change within application relevant temperature ranges has to be determined via calorimetric measurements providing high accuracy.
For the most part, enthalpy curves of PCMs are measured either via differential scanning calorimetry (DSC) or via the T-History method, but rarely with both methods. Combined DSC and T-History measurements allow an improved determination of enthalpy curves of PCM, since intrinsic material properties can be separated from properties of the investigated sample and effects of the applied methods. In order to study when both methods are needed to estimate the behaviour of the bulk material in applications, the enthalpy curves upon heating and upon cooling of nine PCM from different material classes were measured via T-History and DSC in both dynamic and step mode. These are: octacosane, decane-1,10-diol, RT80, methylurea, glutaric acid, magnesium chloride hexahydrate, erythritol, sebacic acid and hydroquinone. The comparison of enthalpy curves in terms of melting temperature, degree of subcooling and enthalpy change within application relevant temperature ranges demonstrates the necessity of combined DSC and T-History measurements for materials with volume dependent behaviour. Melting temperatures agree within the limits of RAL testing regulations and considerably less subcooling is observed for T-History samples. If the PCM under investigation can be characterised reasonably with both methods, enthalpy changes determined via DSC and T-History deviate by less than 5%.
És part deThermochimica Acta, 2014, vol. 596, p. 79-88
Projectes de recerca europeus
Mostrant elements relacionats per títol, autor i matèria.
Enthalpy-temperature plots to compare calorimetric measurements of phase change materials at different sample scales Rathgeber, Christoph; Schmit, Henri; Miró, Laia; Cabeza, Luisa F.; Gutiérrez, Andrea; Ushak, Svetlana; Hiebler, Stefan (Elsevier, 2018)Phase change materials (PCM) can provide high thermal energy storage capacities in narrow temperature ranges around their phase change temperature. The expectable maximum storage capacity of a PCM in a defined temperature ...
IEA SHC Task 42 / ECES Annex 29 – A Simple Tool for the Economic Evaluation of Thermal Energy Storages Rathgeber, Christoph; Hiebler, Stefan; Lävemann, Eberhard; Dolado, Pablo; Lazaro, Ana; Gasia, Jaume; Gracia Cuesta, Alvaro de; Miró, Laia; Cabeza, Luisa F.; König-Haagen, Andreas; Brüggemann, Dieter; Campos-Celador, Álvaro; Franquet, Erwin; Fumey, Benjamin; Dannemand, Mark; Badenhop, Thomas; Diriken, Jan; Nielsen, Jan Erik; Hauer, Andreas (Elsevier, 2016)Within the framework of IEA SHC Task 42 / ECES Annex 29, a simple tool for the economic evaluation of thermal energy storages has been developed and tested on various existing storages. On that account, the storage capacity ...
Determination of the enthalpy of PCM as a function of temperature using a heat-flux DSC - A study of different measurement procedures and their accuracy Castellón, Cecilia; Günther, E.; Mehling, Harald; Hiebler, Stefan; Cabeza, Luisa F. (John Wiley & Sons, 2008)Thermal energy storage by latent heat allows storing high amounts of energy working in narrow margins of temperature. The use of phase change material (PCM) for the latent heat storage has been studied in different applications ...