Embodied energy in thermal energy storage (TES) systems for high temperature applications
Data de publicació2015
MetadadesMostra el registre d'unitat complet
Currently, there is an increasing interest in concentrated solar power (CSP) plants as alternative to produce renewable electricity at large scale by using mirrors to concentrate the solar energy and to convert it into high temperature heat. These facilities can be combined with thermal energy storage (TES) systems, which are, nowadays, one of the most feasible solutions in facing the challenge of the intermittent energy supply and demand. However, they are still in research process and, for that, there is a lack of environmental impact studies of these TES systems complementing solar plants. This paper accounts the environmental impact of three TES systems used nowadays in high temperature applications for CSP plants: first, a system which stores sensible heat in high temperature concrete; second, a system storing sensible heat in molten salts; and third, another system with molten salts but storing latent heat. All the systems are normalised in order to be comparable between them due to its initial storage capacity difference. The environmental impact is accounted by calculating the amount of embodied energy in the components of the different TES systems. Notice that embodied energy refers to the total energy inputs required to make a component. Between the three systems, the sensible heat system using concrete as storage material is the one with less environmental impact while the molten salts and PCM have a higher value of embodied energy, mainly due to the nitrate mixture used as storage material. Finally, advantages and disadvantages of the method proposed used are discussed
És part deApplied Energy, 2015, vol 137, p. 793-799
Projectes de recerca europeus
Mostrant elements relacionats per títol, autor i matèria.
Embodied energy and cost of high temperature thermal energy storage systems for use with concentrated solar power plants Jacob, Rhys; Belusko, Martin; Fernández Renna, Ana Inés; Cabeza, Luisa F.; Saman, Wasim; Bruno, Frank (Elsevier, 2016)The intermittency of renewable energy systems remains one of the major hurdles preventing a large scale uptake of these technologies and concentrated solar power (CSP) systems are no different. However, CSP has the benefit ...
In situ thermal and acoustic performance and environmental impact of the introduction of a shape-stabilized PCM layer for building applications Barreneche Güerisoli, Camila; Navarro Farré, Lidia; Gracia Cuesta, Alvaro de; Fernández Renna, Ana Inés; Cabeza, Luisa F. (Elsevier, 2016)Energy consumption in buildings accounts for up to 34% of total energy demand in developed countries. Thermal energy storage (TES) through phase change materials (PCM) is considered as a promising solution for this energetic ...
Oró Prim, Eduard; Gil, Antoni; Gracia Cuesta, Alvaro de; Boer, Dieter; Cabeza, Luisa F. (Elsevier, 2012)The present work compares the environmental impact of three different thermal energy storage (TES) systems for solar power plants. A Life Cycle Assessment (LCA) for these systems is developed: sensible heat storage both ...