Influence of the scanned side of the row in terrestrial laser sensor applications in vineyards: practical consequences

Arnó Satorra, Jaume; Escolà i Agustí, Alexandre; Masip Vilalta, Joan; Rosell Polo, Joan Ramon

doi:https://doi.org/10.1007/s11119-014-9364-7

Ver/Abrir

Postprint (319.1Kb)

Fecha de publicación

2015

Autor/a

Arnó Satorra, Jaume

Escolà i Agustí, Alexandre

Masip Vilalta, Joan

Rosell Polo, Joan Ramon

Cita recomendada

Arnó Satorra, Jaume; Escolà i Agustí, Alexandre; Masip Vilalta, Joan; Rosell Polo, Joan Ramon; . (2015) . Influence of the scanned side of the row in terrestrial laser sensor applications in vineyards: practical consequences. Precision Agriculture, 2015, vol. 16, núm. 2, p. 119-128. https://doi.org/10.1007/s11119-014-9364-7.

Resumen

Terrestrial laser scanners (TLS) have been used to estimate leaf area and optimise the site-specific management in vineyards. The tree area index (TAI) is a parameter that can be obtained from TLS measurements and has been highly successful in predicting the leaf area index (LAI) in vineyards using linear regression models. However, there are concerns about the possible variation of the models according to the row side on which the scan is performed. A field trial was performed in a North–South oriented vineyard using a tractor-mounted LiDAR system to determine the influence of this operational factor. Four vineyard blocks were scanned from both sides and then defoliated to obtain the real LAI values for 1 m row length sections. Specifically, LAI values were obtained considering the total canopy width and, after separation of the leaves of the right and left sides, LAI values of half canopy were also calculated. To estimate the LAI from the TAI, dummy-variable regression models were used which showed no differences with respect to the scanned side of the canopy. Two consequences are immediate. First, TLS made it possible the LAI mapping of two different rows by scanning from the alley-way with an appropriate laser scanner. Secondly, the same model can be used to estimate the LAI of half canopy (right or left) in operations that require going through all inter-rows (e.g., when applying plant protection products in a vineyard to estimate the vegetation exposed to the sprayer).

URI

http://hdl.handle.net/10459.1/49372

DOI

https://doi.org/10.1007/s11119-014-9364-7

Es parte de

Precision Agriculture, 2015, vol. 16, núm. 2, p. 119-128