New database on phase change materials for thermal energy storage in buildings to help PCM selection
Fecha de publicación2014
Fernández Renna, Ana Inés
Navarro Rivero, Helena
MetadatosMostrar el registro completo del ítem
According to the International Energy Agency (IEA) the primary energy production was increased by 49% and CO2 emissions by 43% over the past 20 years. Furthermore, 30 - 40% of total energy consumption in developed countries comes from the private sector (housing and offices). Thermal energy storage (TES) is proposed as one way to improve the gap between energy consumption and energy supply. TES systems can store energy as sensible heat, latent heat or chemical reaction. Phase change materials (PCM) are extensively studied materials for thermal energy storage as latent heat because these materials have high phase change enthalpy in a wide variety of phase change temperature. Nowadays it is quite difficult to have all the reported information about PCM properties, not only the thermophysical ones but other relevant properties, even though there are different compilations. CES Selector is software used in material selection, besides being a materials database it permits to include new materials introducing their properties, as well as to classify them in several groups, to plot the data and combine graphs production with the material selection under the desired criteria. More than 300 substances used as PCM and reported in the literature were introduced in a new database created using CES Selector. Thermophysical properties as melting temperature (°C) and melting enthalpy (kJ·kg-1) have been plotted and PCM selections under different criteria were carried out. This database can be completed in the future with other relevant properties either than thermal such as chemical properties (durability in different media etc), reported density or viscosity at a given temperature or even cost of each material. Analyzing these plots it is observed that some PCM are represented occupying a wide range of a given thermophysical property. This is the case of CaCl2·6H2O: data came from 7 sources and the occupied area in the plot is the highest one from all the PCM reported. On the other hand, some other PCM are represented with smaller dots associated with a lower dispersion in the property values and this size may possibly be attributed to different reasons: scarce sources for experimental data or low dispersion among several experimental reported values. These results emphasize that there is a lack of standardization for the measurement of the PCM thermophysical properties.
Es parte deEnergy Procedia, 2014, vol. 57, p. 2408-2415
Proyectos de investigación europeos
El ítem tiene asociados los siguientes ficheros de licencia:
Excepto si se señala otra cosa, la licencia del ítem se describe comocc-by-nc-nd (c) Cabeza, Luisa F., et al, 2014
Showing items related by title, author, creator and subject.
Comparison of three different devices available in Spain to test thermal properties of building materials including phase change materials Barreneche Güerisoli, Camila; Gracia Cuesta, Alvaro de; Serrano, Susana; Navarro, Maria E.; Borreguero, Ana María; Fernández Renna, Ana Inés; Carmona, Manuel; Rodriguez, Juan Francisco; Cabeza, Luisa F. (Elsevier, 2013)Thermal properties of materials used in building envelopes must be analysed in order to evaluate the thermal response of the constructive system. This thermal characterisation is a key point during the design phase of a ...
Barreneche Güerisoli, Camila; Navarro, Maria E.; Cabeza, Luisa F.; Fernández Renna, Ana Inés (Elsevier, 2015)Today, thermal energy storage materials are proposed as a promising solution to increase the energy efficiency in building sector and to reduce the total energy demand because building sector accounts up to 34% of total ...
Composite gypsum containing fatty-ester PCM to be used as constructive system: Thermophysical characterization of two shape-stabilized formulations Serrano, Susana; Barreneche Güerisoli, Camila; Fernández Renna, Ana Inés; Farid, Mohammed M.; Cabeza, Luisa F. (Elsevier, 2015)Gypsum board containing a shape-stabilized PCM either as a sheet or as pellets is thermo-physically characterized. The main objective is to elucidate which is the most efficient way to introduce the PCM into gypsum boards ...