Comparison of three different devices available in Spain to test thermal properties of building materials including phase change materials
Data de publicació2013
Navarro, Maria E.
Borreguero, Ana María
Fernández Renna, Ana Inés
Rodriguez, Juan Francisco
MetadadesMostra el registre d'unitat complet
Thermal properties of materials used in building envelopes must be analysed in order to evaluate the thermal response of the constructive system. This thermal characterisation is a key point during the design phase of a building. However, thermal characterisation of constructive systems at laboratory scale is difficult to be carried out under real environment conditions. In this paper, three devices developed by three different research groups in Spain were used to compare in an inter-laboratory test the performance, capabilities and thermal properties of construction systems at lab scale. Tested materials were gypsum blocks containing phase change materials (PCMs) and made by three different ways: using microencapsulated materials Micronal DS5001, a suspension water/PCM and impregnation with RT21. The effective thermal conductivity, the total amount of heat accumulated, and the specific heat were measured using these homemade devices. k results followed same trend but there was a drift between them due to the samples porosity and thickness. Moreover, the k decreased when adding PCM but this behaviour was not followed by impregnated samples; due to the PCM filling gypsum pores instead of air. The Cp results followed same trend CpBlank < CpSuspension < CpMicroencapsulated < CpImpregnated but a gap between results was observed due to different amount of incorporated PCM.
És part deApplied Energy, 2013, núm. 109, p. 421–427
Projectes de recerca europeus
Mostrant elements relacionats per títol, autor i matèria.
Study of Fresh and Hardening Process Properties of Gypsum with Three Different PCM Inclusion Methods Serrano, Susana; Barreneche Güerisoli, Camila; Navarro Ezquerra, Antonia; Haurie, Laia; Fernández Renna, Ana Inés; Cabeza, Luisa F. (MDPI, 2015)Gypsum has two important states (fresh and hardened states), and the addition of phase change materials (PCM) can vary the properties of the material. Many authors have extensively studied properties in the hardened ...
New database on phase change materials for thermal energy storage in buildings to help PCM selection Cabeza, Luisa F.; Serrano, Susana; Fernández Renna, Ana Inés; Navarro Rivero, Helena; Barreneche Güerisoli, Camila (Elsevier, 2014)According to the International Energy Agency (IEA) the primary energy production was increased by 49% and CO2 emissions by 43% over the past 20 years. Furthermore, 30 - 40% of total energy consumption in developed countries ...
In situ thermal and acoustic performance and environmental impact of the introduction of a shape-stabilized PCM layer for building applications Barreneche Güerisoli, Camila; Navarro Farré, Lidia; Gracia Cuesta, Alvaro de; Fernández Renna, Ana Inés; Cabeza, Luisa F. (Elsevier, 2016)Energy consumption in buildings accounts for up to 34% of total energy demand in developed countries. Thermal energy storage (TES) through phase change materials (PCM) is considered as a promising solution for this energetic ...