Compatibility of plastic with phase change materials (PCM)
Data de publicació2011
Fernández Renna, Ana Inés
Manich, A. M.
MetadadesMostra el registre d'unitat complet
Even though paraffin interactions with plastics are known by industry, plastics are commonly proposed as container materials for encapsulating phase change materials (PCM) in many applications. In the literature, there are very few experimental studies of organic PCM migration in plastics and its effects on plastic properties. These interactions are a case study of environmental stress cracking, which is considered one of the most common causes of plastic failure. The aim of this work is an experimental study of interactions of some PCM typically used for thermal energy storage, and some plastic materials currently used as encapsulating materials. With the materials tested in this work, it can be concluded that, for encapsulating organic PCM, low-density polyethylene and polypropylene showed worse behaviour than high-density polyethylene.
És part deInternational Journal of Energy Research, 2011, vol. 35, núm. 9, p. 765–771
Projectes de recerca europeus
Mostrant elements relacionats per títol, autor i matèria.
Castellón, Cecilia; Medrano Martorell, Marc; Roca Enrich, Joan; Cabeza, Luisa F.; Navarro, Maria E.; Fernández Renna, Ana Inés; Lázaro, Ana; Zalba, Belén (Elsevier, 2010)Sandwich panels are a good option as building materials, as they offer excellent characteristics in a modular system. The goal of this study was to demonstrate the feasibility of using the microencapsulated PCM (Micronal ...
Lázaro, Ana; Zalba, Belén; Bobi, M.; Castellón, Cecilia; Cabeza, Luisa F. (American Institute of Chemical Engineers, 2006)Energy storage is a useful tool to increase energy efficiency and energy savings. Solid-Liquid phase change materials (PCMs) are used in latent heat thermal energy storage systems. Plastics are currently used as encapsulate ...
Study on differential scanning calorimetry analysis with two operation modes and organic and inorganic phase change material (PCM) Barreneche Güerisoli, Camila; Solé, Aran; Miró, Laia; Martorell, Ingrid; Fernández Renna, Ana Inés; Cabeza, Luisa F. (Elsevier, 2013)Phase Change Materials (PCM) allow storing thermal energy as latent heat when phase change occurs. In order to characterize these materials the phase change enthalpy and temperature should be perfectly known. Differential ...