Improvement of the thermal inertia of building materials incorporating PCM. Evaluation in the macroscale
Fecha de publicación2013
MetadatosMostrar el registro completo del ítem
The energy demand by the private sector for buildings HVAC systems has increased significantly, driving the scientific community to find different alternatives to reduce this high energy demand. Phase change materials (PCMs) are presented as materials with high thermal energy storage (TES) capacity due to the latent heat stored/released during phase change, able to reduce the energy demand of buildings when incorporated to construction materials. The analysis of the construction materials and their thermophysical properties are a key step in the building design phase. Even though the thermal characterization of real samples might be helpful, it is not always possible and it is usually costly. Therefore, the authors have developed two devices able to characterize effective thermal conductivity of real materials at macroscale and to register the temperature–time response curves produced by the inclusion of PCM in the constructive system for thermal inertia increase. The materials tested have a gypsum or Portland cement matrix which incorporates 5 wt% and 15 wt% of microencapsulated PCM (DS5001 Micronal ). Comparing the results, it was demonstrated that the PCM addition produces a reduction in the thermal conductivity of the samples. Furthermore, to incorporate 5 wt% PCM in Ordinary Portland cement matrixes is more beneficial than to add this PCM amount in gypsum matrixes, from the thermal properties point of view. However, the benefit from extending the PCM addition up to 15 wt% is better for gypsum samples than for Ordinary Portland cement matrixes.
Es parte deApplied Energy, 2013, núm. 109, p. 428–432
Proyectos de investigación europeos
Showing items related by title, author, creator and subject.
Comparison of three different devices available in Spain to test thermal properties of building materials including phase change materials Barreneche Güerisoli, Camila; Gracia Cuesta, Alvaro de; Serrano, Susana; Navarro, Maria E.; Borreguero, Ana María; Fernández Renna, Ana Inés; Carmona, Manuel; Rodriguez, Juan Francisco; Cabeza, Luisa F. (Elsevier, 2013)Thermal properties of materials used in building envelopes must be analysed in order to evaluate the thermal response of the constructive system. This thermal characterisation is a key point during the design phase of a ...
Barreneche Güerisoli, Camila; Navarro, Maria E.; Cabeza, Luisa F.; Fernández Renna, Ana Inés (Elsevier, 2015)Today, thermal energy storage materials are proposed as a promising solution to increase the energy efficiency in building sector and to reduce the total energy demand because building sector accounts up to 34% of total ...
New database on phase change materials for thermal energy storage in buildings to help PCM selection Cabeza, Luisa F.; Serrano, Susana; Fernández Renna, Ana Inés; Navarro Rivero, Helena; Barreneche Güerisoli, Camila (Elsevier, 2014)According to the International Energy Agency (IEA) the primary energy production was increased by 49% and CO2 emissions by 43% over the past 20 years. Furthermore, 30 - 40% of total energy consumption in developed countries ...