Heat transfer enhancement of fatty acids when used as PCMs in thermal energy storage
Fecha de publicación2008
MetadatosMostrar el registro completo del ítem
Phase change materials (PCM) used in latent heat storage systems usually have very low thermal conductivities. This is a major drawback in maintaining the required heat exchange rate between PCM and heat transfer fluid. This paper investigates the enhancement of the heat transfer between PCM and heat transfer fluid, using high thermal conductivity as additives like stainless steel pieces, copper pieces and graphite–PCM composite material. In the experiments, palmitic–lauric acid (80:20) (PL) and stearic–myristic acid (80:20) (SM) were used as PCMs. Test results show that heat transfer enhancement of copper pieces was better at 0.05 Ls 1 flow rate compared to 0.025 L s 1. Using copper as an additive increased the heat transfer rate 1.7 times for melting and 3.8 times for freezing when flow rate was 0.050 L s 1. Decreasing the flow rate from 0.050 to 0.025 Ls 1, increased the melting times 1.3 times and freezing times 1.8 times, decreasing heat transfer rates accordingly. The best result of heat transfer enhancement was observed for the PCM– graphite composite. However, changing the flow rate did not affect the heat transfer rate when graphite was used as additive.
Es parte deInternational Journal of Energy Research,2008, núm. 32, p. 135–143
Proyectos de investigación europeos
Showing items related by title, author, creator and subject.
Cabeza, Luisa F.; Mehling, Harald; Hiebler, Stefan; Ziegler, F. (Elsevier Science, 2002)Efficient and reliable storage systems for thermal energy are an important requirement in many applications where heat demand and supply or availability do not coincide. Heat and cold stores can basically be divided in two ...
Cabeza, Luisa F.; Miró, Laia; Oró Prim, Eduard; Gracia Cuesta, Alvaro de; Martin, Viktoria; Krönauer, Andreas; Rathgeber, Christoph; Farid, Mohammed M.; Paksoy, Halime Ö.; Martínez, Mònica; Fernández Renna, Ana Inés (Elsevier, 2015)According to the IPCC, societies can respond to climate changes by adapting to its impacts and by mitigation, that is, by reducing GHG emissions. No single technology can provide all of the mitigation potential in any ...
Review on thermal energy storage with phase change: materials, heat transfer analysis and applications Zalba, Belén; Marín, José M.; Cabeza, Luisa F.; Mehling, Harald (Elsevier Science, 2003)Thermal energy storage in general, and phase change materials (PCMs) in particular, have been a main topic in research for the last 20 years, but although the information is quantitatively enormous, it is also spread ...