Ultrasonic and LIDAR sensors for electronic canopy characterization in vineyards: advances to improve pesticide application methods
Data de publicació2011
MetadadesMostra el registre d'unitat complet
Canopy characterization is a key factor to improve pesticide application methods in tree crops and vineyards. Development of quick, easy and efficient methods to determine the fundamental parameters used to characterize canopy structure is thus an important need. In this research the use of ultrasonic
and LIDAR sensors have been compared with the traditional manual and destructive canopy measurement procedure. For both methods the values of key parameters such as crop height, crop width, crop volume or leaf area have been compared. Obtained results indicate that an ultrasonic sensor is an appropriate tool to determine the average canopy characteristics, while a LIDAR sensor provides more accuracy and detailed information about the canopy. Good correlations have been obtained between crop volume (CVU) values measured with ultrasonic sensors and leaf area index, LAI (R2 = 0.51). A good correlation has also been obtained between the canopy volume measured with ultrasonic and LIDAR sensors (R2 = 0.52). Laser measurements of crop height (CHL) allow one to accurately predict the canopy volume. The proposed new technologies seems very appropriate as complementary tools to improve the efficiency of pesticide applications, although further improvements are still needed.
És part deSensors, 2011, vol. 11, núm. 2, p. 2177-2194
Els fitxers de llicència següents estan associats amb aquest element:
Mostrant elements relacionats per títol, autor i matèria.
Escolà i Agustí, Alexandre; Planas de Martí, Santiago; Rosell Polo, Joan Ramon; Pomar Gomà, Jesús; Camp, Ferran; Solanelles Batlle, Francesc; Gràcia, Felip; Llorens Calveras, Jordi; Gil Moya, Emilio (Molecular Diversity Preservation International (MDPI), 2011)Electronic canopy characterization is an important issue in tree crop management. Ultrasonic and optical sensors are the most used for this purpose. The objective of this work was to assess the performance of an ultrasonic ...
Variable rate dosing in precision viticulture: Use of electronic devices to improve application efficiency Llorens Calveras, Jordi; Gil Moya, Emilio; Llop, Jordi; Escolà i Agustí, Alexandre (Elsevier, 2010-03)Two different spray application methods were compared in three vine varieties at different crop stages. A conventional spray application with a constant volume rate per unit ground area (1 ha(-1)) was compared with a ...
Advanced Technologies for the Improvement of Spray Application Techniques in Spanish Viticulture: An Overview Rosell Polo, Joan Ramon; Arnó Satorra, Jaume; Escolà i Agustí, Alexandre; Gil Moya, Emilio; Llorens Calveras, Jordi; Llop, Jordi; Gallart, Montserrat (MDPI, 2014)Spraying techniques have been undergoing continuous evolution in recent decades. This paper presents part of the research work carried out in Spain in the field of sensors for characterizing vineyard canopies and monitoring ...