Browsing Articles publicats (Informàtica i Enginyeria Industrial) by Subject "Corrosion"
Now showing items 1-10 of 10
-
Bibliometric map on corrosion in concentrating solar power plants
(MDPI, 2022)Concentrating solar power (CSP), also known as solar thermal electricity (STE), is increasing its deployment worldwide. One of the potential ways to decrease costs in CSP plants is the improvement of corrosion resistance ... -
Corrosion Assessment of Myo-Inositol Sugar Alcohol as a Phase Change Material in Storage Systems Connected to Fresnel Solar Plants
(MDPI, 2019)Thermal energy storage systems work in conjunction with solar technologies with the aim of increasing their dispatchability and competitiveness in the energy market. Among others, latent heat thermal energy storage systems ... -
Corrosion evaluation and prevention of reactor materials to contain thermochemical material for thermal energy storage
(Elsevier, 2016)Thermochemical materials (TCM) can be used for seasonal heat storage, storing high amounts of thermal energy coming from the sun in summer and releasing it in winter, when heating for houses is needed. One promising TCM ... -
Corrosion evaluation of alumina-forming alloys in carbonate molten salt for CSP plants
(Elsevier, 2019)The use of carbonate molten salts for the new generation of concentrated solar power (CSP) plants have been considered and analysed during the last years to improve the efficiency of energy generation. However, the high ... -
Corrosion monitoring and mitigation techniques on advanced thermal energy storage materials for CSP plants
(Elsevier, 2019)High temperature corrosion is one of the most important issues for materials selection, structure design and service life prediction of engineering parts that are exposed to high temperature environments. The prevention ... -
Corrosion performance of alloy 800H and alloy 625 for potential use as molten salts solar receiver materials in concentrating solar power tower plants
(Elsevier, 2022)Two high corrosion resistant super-alloys, alloy 800H and alloy 625, were evaluated for corrosion compatibility with molten nitrate salts at 565 ◦C under air atmosphere since these super-alloys are possible candidates for ... -
Materials selection for thermal energy storage systems in parabolic trough collector solar facilities using high chloride content nitrate salts
(Elservier, 2017)The increasing role of concentrated solar power (CSP) within the renewable energy portfolio is attributed to the possibility of integrating thermal energy storage (TES) systems. Then, CSP technology has become one of the ... -
Materials selection of steam-phase change material (PCM) heat exchanger for thermal energy storage systems in direct steam generation facilities
(Elsevier, 2017)Phase change materials (PCM) is one of the most interesting solutions to be used in thermal energy storage (TES) systems for direct steam generation (DSG) thermosolar facilities. Properties such as high energy density and ... -
Steam-PCM heat exchanger design and materials optimization by using Cr-Mo alloys
(Elsevier, 2018)A387 Gr 91 Cr-Mo alloy corrosion compatibility with LiOH-KOH mixture was evaluated at 315 °C (Test#1) and 360 °C (Test#2). This alloy is studied for a techno-economical optimization of a steam-PCM heat exchanger proposed ... -
TES-PS10 postmortem tests: Carbon steel corrosion performance exposed to molten salts under relevant operation conditions and lessons learnt for commercial scale-up
(Elsevier, 2019)Postmortem tests were performed over components removed from the TES-PS10 pilot plant after almost four years of continuous operation being exposed to solar salts under representative commercial operation conditions. ...